Ukulandela ixesha lokugqibela elikhankanyiweyo indlela yokuphucula amandla okukhetha kwifom yefom yeplanga, siya kukuxelela ezinye iindlela ezimbini.

1. Ukujoja.Ithemplate yokhuni esanda kuphuma kumatshini oshushu inevumba elimnandi, njengerayisi ephekiweyo.Ukuba kukho ezinye izivumba ezivuthayo, kubonisa kuphela ingxaki enye-kukho ingxaki kunye nomlinganiselo weglue, i-formaldehyde eninzi okanye i-phenolic glue ayisetyenziswanga, kwaye umgangatho wemveliso unzima kakhulu.

2. Thatha ibhodi yokhuni kumatshini wokusika kwaye ujonge kuyo.Okokuqala, jonga ubuninzi bebhodi yeplanga, ulinganise ubunzima, ubunzima obunzima, ubuninzi bobuninzi, kunye nomgangatho wemveliso.Emva koko uyaphule ukuze ubone ukwaphuka.Ukuba i-fracture icocekile, ithetha ukuba i-glue ilungile kwaye amandla aphezulu;Ukuba i-fracture burrs "i-intermittent" kakhulu okanye i-layer, oko kuthetha ukuba i-template yokhuni ifakwe kakuhle kwaye umgangatho wemveliso uyingxaki.Emva koko, krazula i-adhesive part from the fracture ukuze ubone ukuba umphezulu ucocekile kwaye kukho naziphi na iifiber ezikrazukileyo ezincamathela kwelinye icala.Ukuba i-delamination icocekile kakhulu, oko kuthetha ukuba amandla okudibanisa ahluphekile.Ukuba kukho iifiber ezinamathele omnye komnye, oko kuthetha ukuba ibhodi yokhuni inamandla okudibanisa.I-plywood egqunywe ngeplastiki yokusingqongileyo inefuthe elibalulekileyo kulawulo lomgangatho weprojekthi kulwakhiwo lweprojekthi.I-smoothness kunye ne-flatness ye-plywood surface iya kuchaphazela ngokuthe ngqo ukunyanzeliswa kwendawo yekhonkrithi yobunjineli.Ngoko ke, imveliso yeplywood kufuneka isekelwe kulawulo olungqongqo lwenkqubo yokuvelisa, kwaye iteknoloji yenkqubo yokuvelisa kufuneka iphuculwe kwiikhonkco zezinto eziluhlaza, i-gluing, i-hot pressing and trimming.Ukuba iplastiki ejongene neplywood yakhiwe ebusika, kufuneka ikhuselwe.Umphezulu we-plywood kufuneka uhlambuluke kwikhephu ngexesha lokuthintela ikhephu ekubambeni ukushisa kweplywood kwaye ibangele ukuba ibhodi ihlambuluke ngexesha lokukhenkceza kunye nokunyibilika.Ukugquma okwaneleyo kufuneka kulungiswe, kwaye ukuphosa kufuneka kuhlanganiswe ngokukhawuleza, ngokukodwa ebusika, i-windshield surface kufuneka ihlanganiswe ngokuqinileyo, kubandakanywa nangaphandle kweplywood.

Iimpawu zenkqubo yeplywood efakwe ngeplastiki

1. Izinto eziphathekayo: Iplanga eyenziwe ngeplastiki yenziwe ngepoplar, birch, eucalyptus kunye nepine.Ibhodi engundoqo ifakwe ngeglue.Umphezulu weplastiki kunye nebhodi engundoqo zisebenzisa iglu eshushu enyibilikayo evela kumazwe angaphandle.Ifilimu yePP kunye nebhodi engundoqo idibene ngokuthe ngqo.

2. Uhlobo lweGlue: iglue ephuma ngaphandle kwe-phenolic, i-melamine glue, i-plastic surface double-layer PE, i-PVC, i-ABS, i-PP, i-PET ukuqinisekisa i-gloss, i-matt, kunye ne-non-slip.

3. Izinto eziluncedo: Iimveliso zeplywood ezenziwe ngeplastiki zenziwe ngokucinezela ngokushushu kabini, kunye nesanti kumacala omabini, ukuchasana kwamanzi, akukho mfuneko yokuxubha i-agent agent, kwaye ukusetyenziswa ngokuphindaphindiweyo kunokufikelela amaxesha angaphezu kwama-30.