Recently our production formula has been upgraded, the red construction film faced plywood uses phenol glue, the color of surface is reddish brown, which is smoother and waterproof. What’s more,the amount of glue used is 250g, more than usual,and the pressure increases to larger, thus the strength of the plywood is enhanced.Although various raw materials and transportation costs have skyrocketed recently month,  as a manufacturer, our profit are low enough,we still insist on strictly controlling the quality of products and only produce practical and reliable products and try to keep prices stable. This is the philosophy of Monster Wood.

Many customers who purchased black film faced plywood reported that the pouring effect of the film faced plywood is perfect, and the smoothness and fineness exceeded expectations. This product most are used as high buildings and bridge. It can be used repeatedly for over 15 times. However,after using too many times, the plastic film paper on the surface may be damaged artificially. Some small defects will appear after pouring and molding, which will affect the molding effect of the wall. Therefore, as a manufacturer, we give some useful tips. The interior of the building should be cleaned accordingly. Many workers do not understand this behavior that why need to clean it? Below, the plywood manufacturer will analyze the reasons for you.

If there are debris on the plywood surface, it will cause defects such as slag inclusions in the concrete. Therefore, we should prepare for cleaning during installation and reserve a cleaning port, which is more convenient. In addition, the joints must be tight, otherwise it will cause a honeycomb pitted surface of the concrete, which will directly affect the quality of the concrete. Therefore, the seam treatment of building formwork is very important. For this reason, the workers must lay a good foundation to ensure that every seam will be tight and prevent quality problems.

In addition,we must be thoroughly clean after each use of the building plywood, and all cement debris should be removed from the surface of the plywood. Avoid using metal or other sharp tools to remove the cement on the surface, in case damage the phenolic film.

If you have any doubts and questions,or want to know about any of our products, welcome to send us emails and message.