China Wholesale Particle Board Manufacturer Manufacturers - Super Smooth Film Faced Plywood – Xinbailin
China Wholesale Particle Board Manufacturer Manufacturers - Super Smooth Film Faced Plywood – Xinbailin Detail:
Distinguish the difference between construction wooden formwork:
First of all, see if there is an open space for drying raw materials. Because all the raw materials need to be dried before they can be used in the workshop, the weight difference between the dried raw material and the undried raw material is 2 tons. It sounds unbelievable, but the facts prove that the moisture in the slab will be diluted. The degree of adhesion of the glue will cause the template to degummed. Second, check the quality of the materials. The raw materials are divided into 1/2/3 grades. The first-class material is no damage, no holes, and it is a whole panel. The secondary raw material is broken but there are no holes, and the tertiary raw material is broken with holes. High-quality templates are made of first-class raw materials. Without good raw materials, it is impossible to make good products.
Choose according to different projects:
Housing construction should use medium-sized combined building templates, because the cross-sections of beams and columns vary a lot, and it is not suitable to use multi-layer laminate cutting.
Wall membranes should use a medium-sized combination, because in the same high-rise building group, there are requirements to be unified,so the medium-sized combination helps to ensure a higher reuse rate.
"Hydraulic climbing formwork" is used for super high-rise or high-rise buildings. The climbing formwork combines the advantages of large formwork and sliding formwork. It can rise layer by layer with the construction of the structure, which speeds up the construction speed and saves space and crane lifting times. Conducive to the safety of high-altitude operations.
The overall multi-layer board is used for the construction of the floor building template, and the multi-layer phenolic glue template with a thickness of 15-18mm is used as much as possible. The thick side of this kind of building template will be damaged after repeated use, so it must be cut in time to ensure that the edges of the multilayer board are flat.
Product Parameter
| Place of Origin: | Guangxi, China | Main Material: | pine,eucalyptus |
| Brand Name: | Heibao | core: | pine,eucalyptus,or requested by clients |
| Model Number: | Film Faced Plywood | face/back: | black(can print log) |
| Grade: | FIRST-CLASS | glue: | MR, melamine, WBP, phenolic |
| size: | 1830x915mm/1220x2440mm | moisture content: | 5%-14% |
| Thickness: | 15mm or as required | density | 590-675 kg/cbm |
| Number of Plies | 10 layers | Packing | Standard export packing |
| Thickness Tolerance | +/-0.3mm | MOQ: | 1*20GP. Less is acceptable |
| Usage: | Outdoor,construction,bridge,etc | Payment Terms: | T/T, L/C |
| Delivery Time: | Within 20 days after order confirmed |
Product detail pictures:
Related Product Guide:
We emphasize development and introduce new products into the market every year for China Wholesale Particle Board Manufacturer Manufacturers - Super Smooth Film Faced Plywood – Xinbailin , The product will supply to all over the world, such as: Cancun, Malawi, Amsterdam, We believe that good business relationships will lead to mutual benefits and improvement for both parties. We now have established long-term and successful cooperative relationships with many customers through their confidence in our customized services and integrity in doing business. We also enjoy a high reputation through our good performance. Better performance will be expected as our principle of integrity. Devotion and Steadiness will remain as ever.
By Gloria from Nepal - 2017.07.28 15:46
The company comply with the contract strict, a very reputable manufacturers, worthy a long-term cooperation.
By Daphne from Bolivia - 2017.10.27 12:12
Related products
-
China Wholesale Building Construction Materials...
Melamine Faced Boards The red construction film faced plywood (short for red board). The red board of our factory selects the first class panel material to rotate the veneer with the moderate thickness so as to meet the EU standards and customer needs. The dry and humidity of red board is strictly controlled by master craftsmen to ensure the bonding strength of the template. Our typesetting process is strict that to ensure our plywood has a moderate thickness, the core board relies on special...
-
China Wholesale Concrete Form Ply Factories - ...
Distinguish the difference between construction wooden formwork: First of all, see if there is an open space for drying raw materials. Because all the raw materials need to be dried before they can be used in the workshop, the weight difference between the dried raw material and the undried raw material is 2 tons. It sounds unbelievable, but the facts prove that the moisture in the slab will be diluted. The degree of adhesion of the glue will cause the template to degummed. Second, check the ...
-
China Wholesale Green Board Plywood Manufacture...
The green plastic surface template is covered with plastic on both sides to make the stress of the plate more balanced, so it is not easy to bend and deform. After the mirror steel roller is calendared, the surface is smoother and brighter; the hardness is large, so there is no need to worry about being scratched by the reinforced sand, and it is wear-resistant and durable. It does not swell, crack or deform under high temperature conditions, is flame-proof, fire-proof, insect-proof, ...
-
China Wholesale Wood Plywood Factories - Fresh...
Advantage 1. No shrinkage, no swelling, no cracking, no deformation under high temperature conditions, flameproof and fireproof; 2. Strong variability, convenient assembly and disassembly, type, shape and specification can be customized according to your requirements; 3. It has the characteristics of anti-insect, anti-corrosion, high hardness and strong stability; Detailed item value item value Warranty 1 Year Main Material Pine,eucalyptus After-sale Service Online technical suppor...
-
China Wholesale Hardwood Plywood Factories - B...
Melamine Faced Boards The film faced plywood is a film on both sides of the original board, which can increase the template’s reuse rate. It is usually a black film. The film panel uses high-quality pine and eucalyptus as raw materials, uses high-quality special and sufficient glue, and adopts a new type of plywood steaming machine to ensure uniform glue application and improve product quality. During the production process, employees are required to arrange the boards reasonably to avoid pro...
-
China Wholesale Marine Plywood 18mm Suppliers -...
Product Description Choose the material according to your needs: Generally, the panels are pine, eucalyptus, poplar and birch, so please understand the difference between these materials when buying. Next is to choose the core board. High-quality construction plywood generally use the commonly known "groceries" as the core board, but some companies doping to use the third-level board-scrap as the core board. However the inferior board generally has more hollows, and the number of repeated ...
